Digital Flame Photometer – Na/K/Li/Ca Analyzer for Soil & Lab
Digital flame photometer for rapid determination of sodium, potassium, lithium and calcium. A must-have for soil and fertilizer testing labs.
₨220,000.00
-
Pick up from the Woodmart Store
To pick up today
Free
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
Free
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
Free
-
Warranty 1 year
-
Free 30-Day returns
Payment Methods:
Description
A flame photometer measures the concentration of alkali and alkaline-earth metals – sodium, potassium, lithium and calcium – by the characteristic light emitted when a sample is sprayed into a flame. It is the standard workhorse method for these elements in soil extracts, plant tissue, fertilizers and water.
In Pakistan, potassium and sodium analysis is central to soil fertility work. Soil testing labs serving farmers need fast K results to write fertilizer recommendations; fertilizer companies need Na/K/Ca checks for quality control; cement, glass and clinical labs use the same technology. Compared to atomic absorption spectrometers, a flame photometer is far cheaper and simpler to run while delivering the accuracy routine work requires.
The medium-tier digital flame photometer adds multi-element capability (K, Na, Li, Ca, Ba on advanced models), digital readouts, auto-ignition and data output. Results that took a skilled chemist an hour by classical methods now take minutes.
A typical package includes the photometer unit, compressor (or connection for external air supply), standard solution set for calibration, sample beakers, and power cable. LPG or natural gas is required as fuel.
This product is aimed at soil and fertilizer testing labs, agricultural research institutes, university chemistry and agriculture departments, fertilizer manufacturers, and water quality labs in Pakistan.
Key Features
- Measures K, Na, Li, Ca (and Ba on multi-element models) in a single aspiration
- Digital LCD display with direct concentration readout
- Auto-ignition system for safe, one-button flame start
- High-sensitivity photodetector with interference filters per element
- Built-in air compressor (on compressor models) – no external air line needed
- Linearity and drift compensation for stable readings across a batch
- RS232/USB data output for printers and lab software
- Safety flame-failure cut-off and gas-leak protection
Specifications
| elements | K, Na, Li, Ca (Ba optional) |
|---|---|
| range_K | 0-100 ppm (typical) |
| range_Na | 0-100 ppm (typical) |
| sensitivity | <0.5 ppm K, <0.2 ppm Na (typical) |
| repeatability | <1% CV |
| sample_uptake | ~6 ml/min |
| fuel | LPG / natural gas + air |
| display | LCD digital |
| power | 220V / 50Hz |
How to Use
- Place the unit in a ventilated area away from drafts; connect gas (LPG) and power.
- Turn on, allow the compressor and electronics to stabilize for 15-30 minutes.
- Calibrate with standard solutions of known K/Na concentration; run a blank between standards.
- Aspirate the prepared sample (filtered soil extract or digest); read the stable concentration on the display.
- Flush with distilled water between samples to prevent carryover.
- After the session, shut off gas, flush the burner, and wipe the sample chamber.
- Safety: never leave the flame unattended; keep gas cylinders secured and check hoses for leaks. Maintenance: clean the burner and nebulizer weekly; replace filters as needed.
Note: The price shown is a market reference estimate. Final price will be confirmed on your quote request — contact us for the best current price.

Reviews
Clear filtersThere are no reviews yet.